Kerosakan Turbine yg biasa berlaku:
Simtom dari minyak hitam..
1. Dirt In Oil
Foreign materials in oil, metal shavings, abrasives from inadequate filtration and dilution can score the bearings and destroy the oil film that supports the shaft. Dirty oil damages the turbocharger with heavy scoring of critical bearing surfaces.
• Blocked, damaged or poor quality
• Dirt introduced during servicing.
• Engine wear or manufacturing
• Malfunctioning of oil filter bypass
• Poor quality oil carbonising.
2. Insufficient Lubrication
Turbocharger rotor operates at high speed on very thin film of oil. Loss of this oil film for a repetitive short duration of 4-5 sec can lead to metal-to-metal contact, wheel-to-housing rub and turbocharger failure.
• Heat discolouration on shaft.
• Polishing and scoring on critical
surfaces such as journal/thrust
• Kinked/ restricted/ broken oil feed pipes.
• Low/ no oil levels.
• Oil pump failures.
• Blocked oil filters.
• Long period of non use.
• Oil contamination.
• Coked bearing housing.
• Failure to crank the engine after oil filter change.
Kerosakan akibat benda asing yg masuk dalam turbine..fin
Foreign object damage is caused by foreign materials entering the turbine/compressor housing and impacting the turbine or compressor wheel.
This leads to a lost of efficiency and unbalance rotation, ultimately resulting in turbo failure.
• Foreign objects such as screws, nuts, and bolts entering the compressor
housing as a result of negligence.
• Debris from damaged air filters.
• Debris from exhaust manifold, cracked turbine housing, engine valve and
piston impacting the turbine wheel.
Kepanasan suhu terlampau tinggi
Extreme turbo temperatures are caused by excessive exhaust temperatures and can damage turbo during operation or shutdown.
• Erosion of the turbine wheel.
• Cracked turbine inlet flange/wall.
• Blockage at oil drain cavity of
• Deformation of turbine housing.
• Excessive exhaust temperature due to injection pump modifications
to over deliver fuel.
• Excessive oil temperature.
• Non-approved turbine housing specifications, causing excessive
• Carbonising due to poor oil quality.
• Repeated hot shutdown.